Section: Ghostscript (1)
Updated: 8 August 2012Index
Return to Main Contents
gs - Ghostscript (PostScript and PDF language interpreter and previewer)
] [ files
command invokes Ghostscript
, an interpreter of Adobe Systems'
(tm) and Portable Document Format
reads "files" in sequence and executes them as Ghostscript
programs. After doing this, it reads further input from the standard input
stream (normally the keyboard), interpreting each line separately and
output to an output device (may be a file or an X11 window preview,
see below). The
interpreter exits gracefully when it encounters the "quit" command (either
in a file or from the keyboard), at end-of-file, or at an interrupt signal
(such as Control-C at the keyboard).
The interpreter recognizes many option switches, some of which are described
below. Please see the usage documentation for complete information. Switches
may appear anywhere in the command line and apply to all files thereafter.
Invoking Ghostscript with the -h or -? switch produces a
message which shows several useful switches, all the devices known to
that executable, and the search path for fonts; on Unix it also shows the
location of detailed documentation.
Ghostscript may be built to use many different output devices. To see
which devices your executable includes, run "gs -h".
specify a particular device, Ghostscript normally opens the first one of
those and directs output to it.
If you have installed the ghostscript-x Debian package and are under X,
the default device is an X11 window (previewer), else ghostscript will
use the bbox device and print on stdout the dimension of the postscript file.
So if the first one in the list is the one
you want to use, just issue the command
You can also check the set of available devices from within Ghostscript:
invoke Ghostscript and type
but the first device on the resulting list may not be the default device
you determine with "gs -h". To specify "AbcXyz" as the
initial output device, include the switch
For example, for output to an Epson printer you might use the command
gs -sDEVICE=epson myfile.ps
The "-sDEVICE=" switch must precede the first mention of a file to print,
and only the switch's first use has any effect.
Finally, you can specify a default device in the environment variable
GS_DEVICE. The order of precedence for these alternatives from
highest to lowest (Ghostscript uses the device defined highest in the list)
Some devices can support different resolutions (densities). To specify
the resolution on such a printer, use the "-r" switch:
gs -sDEVICE=<device> -r<xres>x<yres>
For example, on a 9-pin Epson-compatible printer, you get the
lowest-density (fastest) mode with
gs -sDEVICE=epson -r60x72
and the highest-density (best output quality) mode with
gs -sDEVICE=epson -r240x72.
If you select a printer as the output device, Ghostscript also allows you
to choose where Ghostscript sends the output -- on Unix systems, usually
to a temporary file. To send the output to a file "foo.xyz",
use the switch
You might want to print each page separately. To do this, send the output
to a series of files "foo1.xyz, foo2.xyz, ..." using the "-sOutputFile="
switch with "%d" in a filename template:
Each resulting file receives one page of output, and the files are numbered
in sequence. "%d" is a printf format specification; you can also use a
variant like "%02d".
You can also send output to a pipe. For example, to
pipe output to the "lpr" command (which, on many Unix systems,
directs it to a printer), use the option
You can also send output to standard output:
In this case you must also use the -q switch, to prevent Ghostscript
from writing messages to standard output.
To select a specific paper size, use the command line switch
Most ISO and US paper sizes are recognized. See the usage documentation for
a full list, or the definitions in the initialization file "gs_statd.ps".
Ghostscript can do many things other than print or view PostScript and
PDF files. For example, if you want to know the bounding box of a
PostScript (or EPS) file, Ghostscript provides a special "device" that
just prints out this information.
For example, using one of the example files distributed with Ghostscript,
gs -sDEVICE=bbox golfer.ps
%%BoundingBox: 0 25 583 732
%%HiResBoundingBox: 0.808497 25.009496 582.994503 731.809445
- -- filename arg1 ...
Takes the next argument as a file name as usual, but takes all remaining
arguments (even if they have the syntactic form of switches) and defines
the name "ARGUMENTS" in "userdict" (not "systemdict") as an
array of those strings, before running the file. When Ghostscript
finishes executing the file, it exits back to the shell.
- Define a name in "systemdict" with the given definition. The token must be
exactly one token (as defined by the "token" operator) and may contain no
- Define a name in "systemdict" with value=null.
- Define a name in "systemdict" with a given string as value. This is
different from -d. For example, -dname=35 is equivalent to the
/name 35 def
whereas -sname=35 is equivalent to
/name (35) def
Makes Ghostscript to look first in the current directory for library files.
By default, Ghostscript no longer looks in the current directory,
unless, of course, the first explicitly supplied directory is "." in -I.
See also the INITIALIZATION FILES section below, and bundled
Use.htm for detailed discussion on search paths and how Ghostcript finds files.
Quiet startup: suppress normal startup messages, and also do the
equivalent of -dQUIET.
Equivalent to -dDEVICEWIDTH=number1 and
-dDEVICEHEIGHT=number2. This is for the benefit of devices
(such as X11 windows) that require (or allow) width and height to be
- Equivalent to -dDEVICEXRESOLUTION=number1 and
-dDEVICEYRESOLUTION=number2. This is for the benefit of
devices such as printers that support multiple X and Y resolutions. If
only one number is given, it is used for both X and Y resolutions.
Adds the designated list of directories at the head of the
search path for library files.
This is not really a switch, but indicates to Ghostscript that standard
input is coming from a file or a pipe and not interactively from the
command line. Ghostscript reads from standard input until it reaches
end-of-file, executing it like any other file, and then continues with
processing the command line. When the command line has been entirely
processed, Ghostscript exits rather than going into its interactive mode.
Note that the normal initialization file "gs_init.ps" makes "systemdict"
read-only, so the values of names defined with -D, -d,
-S, or -s cannot be changed (although, of course, they can be
superseded by definitions in "userdict" or other dictionaries.)
Causes individual character outlines to be loaded from the disk
the first time they are encountered. (Normally Ghostscript loads all the
character outlines when it loads a font.) This may allow loading more
fonts into RAM, at the expense of slower rendering.
Disables character caching. Useful only for debugging.
Disables the "bind" operator. Useful only for debugging.
Suppresses the normal initialization of the output device.
This may be useful when debugging.
Disables the prompt and pause at the end of each page. This may be
desirable for applications where another program is driving Ghostscript.
Disables the use of fonts supplied by the underlying platform (for instance
X Windows). This may be needed if the platform fonts look undesirably
different from the scalable fonts.
Restricts file operations the job can perform. Strongly recommended for
spoolers, conversion scripts or other sensitive environments where a badly
written or malicious PostScript program code must be prevented from changing
Leaves "systemdict" writable. This is necessary when running special
utility programs such as font2c and pcharstr, which must bypass
normal PostScript access protection.
Selects an alternate initial output device, as described above.
Selects an alternate output file (or pipe) for the initial output
device, as described above.
option disables the "deletefile" and "renamefile" operators and prohibits
opening piped commands ("%pipe%cmd"). Only "%stdout" and "%stderr" can be
opened for writing. It also disables reading from files, except for "%stdin",
files given as a command line argument, and files contained in paths given by
LIBPATH and FONTPATH or specified by the system params /FontResourceDir and
This mode also sets the .LockSafetyParams parameter of the initial output device
to protect against programs that attempt to write to files using the OutputFile
device parameter. Since the device parameters specified on the command line,
including OutputFile, are set prior to SAFER mode, use of "-sOutputFile=..." on
the command line is unrestricted.
SAFER mode prevents changing the /GenericResourceDir, /FontResourceDir,
/SystemParamsPassword, and /StartJobPassword.
While SAFER mode is not the default, it is the default for many wrapper scripts
such as ps2pdf and may be the default in a subsequent release of Ghostscript.
Thus when running programs that need to open files or set restricted parameters
you should pass the
command line option or its synonym
When running with
it is possible to perform a "save" followed by ".setsafe", execute a file or
procedure in SAFER mode, and then use "restore" to return to NOSAFER mode. In
order to prevent the save object from being restored by the foreign file or
procedure, the ".runandhide" operator should be used to hide the save object
from the restricted procedure.
The locations of many Ghostscript run-time files are compiled into the
executable when it is built.
Run "gs -h" to find the
location of Ghostscript documentation on your system, from which you can
get more details. On a Debian system they are in /usr.
Startup files, utilities, and basic font definitions (where [0-9]*.[0.9]* is
the ghostscript version)
More font definitions from the gsfonts package
Ghostscript demonstration files (if ghostscript-doc package is installed)
Diverse document files (may need to install ghostscript-doc package)
When looking for the initialization files "gs_*.ps", the files related to
fonts, or the file for the "run" operator, Ghostscript first tries to open
the file with the name as given, using the current working directory if no
directory is specified. If this fails, and the file name doesn't specify
an explicit directory or drive (for instance, doesn't contain "/" on Unix
systems), Ghostscript tries directories in this
the directories specified by the -I switches in the command
line (see below), if any;
the directories specified by the GS_LIB environment variable,
the directories specified by the GS_LIB_DEFAULT macro in the
Ghostscript makefile when the executable was built.
on a Debian system where
"[0-9]*.[0-9]*" represents the Ghostscript version number
Each of these (GS_LIB_DEFAULT, GS_LIB, and -I parameter)
may be either a single directory or a list of directories separated by
String of options to be processed before the command line options
Used to specify an output device
Path names used to search for fonts
Path names for initialization files and fonts
Where temporary files are made
Ghostscript, or more properly the X11 display device, looks for the
following resources under the program name "Ghostscript":
The border width in pixels (default = 1).
The name of the border color (default = black).
The window size and placement, WxH+X+Y (default is NULL).
The number of x pixels per inch (default is computed from WidthOfScreen
The number of y pixels per inch (default is computed from
HeightOfScreen and HeightMMOfScreen).
Determines whether backing store is to be used for saving display window
(default = true).
See the usage document for a more complete list of resources. To set these
resources on Unix, put them in a file such as "~/.Xresources" in the
Then merge these resources into the X server's resource database:
% xrdb -merge ~/.Xresources
The various Ghostscript document files (above), especially Use.htm
On Debian you may need to install ghostscript-doc before
reading the documentation.
and the Usenet news group
This document was last revised for Ghostscript version 9.06.
Artifex Software, Inc. are the primary maintainers
Russell J. Lang, gsview at ghostgum.com.au, is the author of
most of the MS Windows code in Ghostscript.
- SPECIAL NAMES
- SAFER MODE
- INITIALIZATION FILES
- X RESOURCES
- SEE ALSO