debhelper
Section: Debhelper (7)
Updated: 2016-07-24
Index
Return to Main Contents
NAME
debhelper - the debhelper tool suite
SYNOPSIS
dh_* [
-v] [
-a] [
-i] [
-s] [
--no-act] [
-ppackage] [
-Npackage] [
-Ptmpdir]
DESCRIPTION
Debhelper is used to help you build a Debian package. The philosophy behind
debhelper is to provide a collection of small, simple, and easily
understood tools that are used in
debian/rules to automate various common
aspects of building a package. This means less work for you, the packager.
It also, to some degree means that these tools can be changed if Debian
policy changes, and packages that use them will require only a rebuild to
comply with the new policy.
A typical debian/rules file that uses debhelper will call several debhelper
commands in sequence, or use dh(1) to automate this process. Examples of
rules files that use debhelper are in /usr/share/doc/debhelper/examples/
To create a new Debian package using debhelper, you can just copy one of
the sample rules files and edit it by hand. Or you can try the dh-make
package, which contains a dh_make command that partially
automates the process. For a more gentle introduction, the maint-guide Debian
package contains a tutorial about making your first package using debhelper.
DEBHELPER COMMANDS
Here is the list of debhelper commands you can use. See their man
pages for additional documentation.
- dh_auto_build(1)
-
automatically builds a package
- dh_auto_clean(1)
-
automatically cleans up after a build
- dh_auto_configure(1)
-
automatically configure a package prior to building
- dh_auto_install(1)
-
automatically runs make install or similar
- dh_auto_test(1)
-
automatically runs a package's test suites
- dh_bugfiles(1)
-
install bug reporting customization files into package build directories
- dh_builddeb(1)
-
build Debian binary packages
- dh_clean(1)
-
clean up package build directories
- dh_compress(1)
-
compress files and fix symlinks in package build directories
- dh_fixperms(1)
-
fix permissions of files in package build directories
- dh_gconf(1)
-
install GConf defaults files and register schemas
- dh_gencontrol(1)
-
generate and install control file
- dh_icons(1)
-
Update caches of Freedesktop icons
- dh_install(1)
-
install files into package build directories
- dh_installcatalogs(1)
-
install and register SGML Catalogs
- dh_installchangelogs(1)
-
install changelogs into package build directories
- dh_installcron(1)
-
install cron scripts into etc/cron.*
- dh_installdeb(1)
-
install files into the DEBIAN directory
- dh_installdebconf(1)
-
install files used by debconf in package build directories
- dh_installdirs(1)
-
create subdirectories in package build directories
- dh_installdocs(1)
-
install documentation into package build directories
- dh_installemacsen(1)
-
register an Emacs add on package
- dh_installexamples(1)
-
install example files into package build directories
- dh_installgsettings(1)
-
install GSettings overrides and set dependencies
- dh_installifupdown(1)
-
install if-up and if-down hooks
- dh_installinfo(1)
-
install info files
- dh_installinit(1)
-
install service init files into package build directories
- dh_installlogcheck(1)
-
install logcheck rulefiles into etc/logcheck/
- dh_installlogrotate(1)
-
install logrotate config files
- dh_installman(1)
-
install man pages into package build directories
- dh_installmenu(1)
-
install Debian menu files into package build directories
- dh_installmime(1)
-
install mime files into package build directories
- dh_installmodules(1)
-
register kernel modules
- dh_installpam(1)
-
install pam support files
- dh_installppp(1)
-
install ppp ip-up and ip-down files
- dh_installudev(1)
-
install udev rules files
- dh_installwm(1)
-
register a window manager
- dh_installxfonts(1)
-
register X fonts
- dh_link(1)
-
create symlinks in package build directories
- dh_lintian(1)
-
install lintian override files into package build directories
- dh_listpackages(1)
-
list binary packages debhelper will act on
- dh_makeshlibs(1)
-
automatically create shlibs file and call dpkg-gensymbols
- dh_md5sums(1)
-
generate DEBIAN/md5sums file
- dh_movefiles(1)
-
move files out of debian/tmp into subpackages
- dh_perl(1)
-
calculates Perl dependencies and cleans up after MakeMaker
- dh_prep(1)
-
perform cleanups in preparation for building a binary package
- dh_shlibdeps(1)
-
calculate shared library dependencies
- dh_strip(1)
-
strip executables, shared libraries, and some static libraries
- dh_testdir(1)
-
test directory before building Debian package
- dh_testroot(1)
-
ensure that a package is built as root
- dh_ucf(1)
-
register configuration files with ucf
- dh_usrlocal(1)
-
migrate usr/local directories to maintainer scripts
Deprecated Commands
A few debhelper commands are deprecated and should not be used.
- dh_desktop(1)
-
deprecated no-op
- dh_installmanpages(1)
-
old-style man page installer (deprecated)
- dh_scrollkeeper(1)
-
deprecated no-op
- dh_suidregister(1)
-
suid registration program (deprecated)
- dh_undocumented(1)
-
undocumented.7 symlink program (deprecated no-op)
Other Commands
If a program's name starts with
dh_, and the program is not on the above
lists, then it is not part of the debhelper package, but it should still
work like the other programs described on this page.
DEBHELPER CONFIG FILES
Many debhelper commands make use of files in
debian/ to control what they
do. Besides the common
debian/changelog and
debian/control, which are
in all packages, not just those using debhelper, some additional files can
be used to configure the behavior of specific debhelper commands. These
files are typically named debian/
package.foo (where
package of course,
is replaced with the package that is being acted on).
For example, dh_installdocs uses files named debian/package.docs to list
the documentation files it will install. See the man pages of individual
commands for details about the names and formats of the files they use.
Generally, these files will list files to act on, one file per line. Some
programs in debhelper use pairs of files and destinations or slightly more
complicated formats.
Note for the first (or only) binary package listed in
debian/control, debhelper will use debian/foo when there's no
debian/package.foo file.
In some rare cases, you may want to have different versions of these files
for different architectures or OSes. If files named debian/package.foo.ARCH
or debian/package.foo.OS exist, where ARCH and OS are the same as the
output of "dpkg-architecture -qDEB_HOST_ARCH`` /
''dpkg-architecture -qDEB_HOST_ARCH_OS",
then they will be used in preference to other, more general files.
Mostly, these config files are used to specify lists of various types of
files. Documentation or example files to install, files to move, and so on.
When appropriate, in cases like these, you can use standard shell wildcard
characters (? and * and [..] character classes) in the files.
You can also put comments in these files; lines beginning with # are
ignored.
The syntax of these files is intentionally kept very simple to make them
easy to read, understand, and modify. If you prefer power and complexity,
you can make the file executable, and write a program that outputs
whatever content is appropriate for a given situation. When you do so,
the output is not further processed to expand wildcards or strip comments.
SHARED DEBHELPER OPTIONS
The following command line options are supported by all debhelper programs.
- -v, --verbose
-
Verbose mode: show all commands that modify the package build directory.
- --no-act
-
Do not really do anything. If used with -v, the result is that the command
will output what it would have done.
- -a, --arch
-
Act on architecture dependent packages that should be built for the
build architecture.
- -i, --indep
-
Act on all architecture independent packages.
- -ppackage, --package=package
-
Act on the package named package. This option may be specified multiple
times to make debhelper operate on a given set of packages.
- -s, --same-arch
-
This used to be a smarter version of the -a flag, but the -a flag is now
equally smart.
- -Npackage, --no-package=package
-
Do not act on the specified package even if an -a, -i, or -p option lists
the package as one that should be acted on.
- --remaining-packages
-
Do not act on the packages which have already been acted on by this debhelper
command earlier (i.e. if the command is present in the package debhelper log).
For example, if you need to call the command with special options only for a
couple of binary packages, pass this option to the last call of the command to
process the rest of packages with default settings.
- --ignore=file
-
Ignore the specified file. This can be used if debian/ contains a debhelper
config file that a debhelper command should not act on. Note that
debian/compat, debian/control, and debian/changelog can't be ignored, but
then, there should never be a reason to ignore those files.
For example, if upstream ships a debian/init that you don't want
dh_installinit to install, use --ignore=debian/init
- -Ptmpdir, --tmpdir=tmpdir
-
Use tmpdir for package build directory. The default is debian/package
- --mainpackage=package
-
This little-used option changes the package which debhelper considers the
``main package'', that is, the first one listed in debian/control, and the
one for which debian/foo files can be used instead of the usual
debian/package.foo files.
- -O=option|bundle
-
This is used by dh(1) when passing user-specified options to all the
commands it runs. If the command supports the specified option or option
bundle, it will take effect. If the command does not support the option (or
any part of an option bundle), it will be ignored.
COMMON DEBHELPER OPTIONS
The following command line options are supported by some debhelper programs.
See the man page of each program for a complete explanation of what each
option does.
- -n
-
Do not modify postinst, postrm, etc. scripts.
- -Xitem, --exclude=item
-
Exclude an item from processing. This option may be used multiple times,
to exclude more than one thing. The \fIitem\fR is typically part of a
filename, and any file containing the specified text will be excluded.
- -A, --all
-
Makes files or other items that are specified on the command line take effect
in ALL packages acted on, not just the first.
BUILD SYSTEM OPTIONS
The following command line options are supported by all of the
dh_auto_*
debhelper programs. These programs support a variety of build systems,
and normally heuristically determine which to use, and how to use them.
You can use these command line options to override the default behavior.
Typically these are passed to
dh(1), which then passes them to all the
dh_auto_* programs.
- -Sbuildsystem, --buildsystem=buildsystem
-
Force use of the specified buildsystem, instead of trying to auto-select
one which might be applicable for the package.
- -Ddirectory, --sourcedirectory=directory
-
Assume that the original package source tree is at the specified
directory rather than the top level directory of the Debian
source package tree.
- -B[directory], --builddirectory=[directory]
-
Enable out of source building and use the specified directory as the build
directory. If directory parameter is omitted, a default build directory
will be chosen.
If this option is not specified, building will be done in source by default
unless the build system requires or prefers out of source tree building.
In such a case, the default build directory will be used even if
--builddirectory is not specified.
If the build system prefers out of source tree building but still
allows in source building, the latter can be re-enabled by passing a build
directory path that is the same as the source directory path.
- --parallel
-
Enable parallel builds if underlying build system supports them.
The number of parallel jobs is controlled by the
DEB_BUILD_OPTIONS environment variable (``Debian Policy, section 4.9.1'') at
build time. It might also be subject to a build system specific limit.
If this option is not specified, debhelper currently defaults to not
allowing parallel package builds.
- --max-parallel=maximum
-
This option implies --parallel and allows further limiting the number of
jobs that can be used in a parallel build. If the package build is known to
only work with certain levels of concurrency, you can set this to the maximum
level that is known to work, or that you wish to support.
- --list, -l
-
List all build systems supported by debhelper on this system. The list
includes both default and third party build systems (marked as such). Also
shows which build system would be automatically selected, or which one
is manually specified with the --buildsystem option.
COMPATIBILITY LEVELS
From time to time, major non-backwards-compatible changes need to be made
to debhelper, to keep it clean and well-designed as needs change and its
author gains more experience. To prevent such major changes from breaking
existing packages, the concept of debhelper compatibility levels was
introduced. You tell debhelper which compatibility level it should use, and
it modifies its behavior in various ways.
Tell debhelper what compatibility level to use by writing a number to
debian/compat. For example, to turn on v9 mode:
% echo 9 > debian/compat
Your package will also need a versioned build dependency on a version of
debhelper equal to (or greater than) the compatibility level your package
uses. So for compatibility level 9, ensure debian/control has:
Build-Depends: debhelper (>= 9)
Unless otherwise indicated, all debhelper documentation assumes that you
are using the most recent compatibility level, and in most cases does not
indicate if the behavior is different in an earlier compatibility level, so
if you are not using the most recent compatibility level, you're advised to
read below for notes about what is different in earlier compatibility
levels.
These are the available compatibility levels:
- v1
-
This is the original debhelper compatibility level, and so it is the default
one. In this mode, debhelper will use debian/tmp as the package tree
directory for the first binary package listed in the control file, while using
debian/package for all other packages listed in the control file.
This mode is deprecated.
- v2
-
In this mode, debhelper will consistently use debian/package
as the package tree directory for every package that is built.
This mode is deprecated.
- v3
-
This mode works like v2, with the following additions:
-
- -
-
Debhelper config files support globbing via * and ?, when appropriate. To
turn this off and use those characters raw, just prefix with a backslash.
- -
-
dh_makeshlibs makes the postinst and postrm scripts call ldconfig.
- -
-
Every file in etc/ is automatically flagged as a conffile by dh_installdeb.
-
This mode is deprecated.
- v4
-
Changes from v3 are:
-
- -
-
dh_makeshlibs -V will not include the Debian part of the version number in
the generated dependency line in the shlibs file.
- -
-
You are encouraged to put the new ${misc:Depends} into debian/control to
supplement the ${shlibs:Depends} field.
- -
-
dh_fixperms will make all files in bin/ directories and in etc/init.d
executable.
- -
-
dh_link will correct existing links to conform with policy.
-
This mode is deprecated.
- v5
-
Changes from v4 are:
-
- -
-
Comments are ignored in debhelper config files.
- -
-
dh_strip --dbg-package now specifies the name of a package to put debugging
symbols in, not the packages to take the symbols from.
- -
-
dh_installdocs skips installing empty files.
- -
-
dh_install errors out if wildcards expand to nothing.
-
- v6
-
Changes from v5 are:
-
- -
-
Commands that generate maintainer script fragments will order the
fragments in reverse order for the prerm and postrm scripts.
- -
-
dh_installwm will install a slave manpage link for x-window-manager.1.gz,
if it sees the man page in usr/share/man/man1 in the package build
directory.
- -
-
dh_builddeb did not previously delete everything matching
DH_ALWAYS_EXCLUDE, if it was set to a list of things to exclude, such as
CVS:.svn:.git. Now it does.
- -
-
dh_installman allows overwriting existing man pages in the package build
directory. In previous compatibility levels it silently refuses to do this.
-
- v7
-
Changes from v6 are:
-
- -
-
dh_install, will fall back to looking for files in debian/tmp if it doesn't
find them in the current directory (or wherever you tell it look using
--sourcedir). This allows dh_install to interoperate with dh_auto_install,
which installs to debian/tmp, without needing any special parameters.
- -
-
dh_clean will read debian/clean and delete files listed there.
- -
-
dh_clean will delete toplevel *-stamp files.
- -
-
dh_installchangelogs will guess at what file is the upstream changelog if
none is specified.
-
- v8
-
Changes from v7 are:
-
- -
-
Commands will fail rather than warning when they are passed unknown options.
- -
-
dh_makeshlibs will run dpkg-gensymbols on all shared libraries that it
generates shlibs files for. So -X can be used to exclude libraries.
Also, libraries in unusual locations that dpkg-gensymbols would not
have processed before will be passed to it, a behavior change that
can cause some packages to fail to build.
- -
-
dh requires the sequence to run be specified as the first parameter, and
any switches come after it. Ie, use "dh $@ --foo``, not ''dh --foo $@".
- -
-
dh_auto_* prefer to use Perl's Module::Build in preference to Makefile.PL.
-
- v9
-
This is the recommended mode of operation.
Changes from v8 are:
-
- -
-
Multiarch support. In particular, dh_auto_configure passes
multiarch directories to autoconf in --libdir and --libexecdir.
- -
-
dh is aware of the usual dependencies between targets in debian/rules.
So, ``dh binary'' will run any build, build-arch, build-indep, install,
etc targets that exist in the rules file. There's no need to define an
explicit binary target with explicit dependencies on the other targets.
- -
-
dh_strip compresses debugging symbol files to reduce the installed
size of -dbg packages.
- -
-
dh_auto_configure does not include the source package name
in --libexecdir when using autoconf.
- -
-
dh does not default to enabling --with=python-support
- -
-
All of the dh_auto_* debhelper programs and dh set
environment variables listed by dpkg-buildflags, unless
they are already set.
- -
-
dh_auto_configure passes dpkg-buildflags CFLAGS, CPPFLAGS, and
LDFLAGS to perl Makefile.PL and Build.PL
- -
-
dh_strip puts separated debug symbols in a location based on their
build-id.
- -
-
Executable debhelper config files are run and their output used as the
configuration.
-
- v10
-
This compatibility level is still open for development; use with caution.
Changes from v9 are:
-
- -
-
dh_installinit will no longer install a file named debian/package
as an init script.
- -
-
dh_installdocs will error out if it detects links created with
--link-doc between packages of architecture ``all'' and non-``all'' as it
breaks binNMUs.
- -
-
dh no longer creates the package build directory when skipping
running debhelper commands. This will not affect packages that only build
with debhelper commands, but it may expose bugs in commands not included in
debhelper.
-
NOTES
Multiple binary package support
If your source package generates more than one binary package, debhelper
programs will default to acting on all binary packages when run. If your
source package happens to generate one architecture dependent package, and
another architecture independent package, this is not the correct behavior,
because you need to generate the architecture dependent packages in the
binary-arch
debian/rules target, and the architecture independent packages
in the binary-indep
debian/rules target.
To facilitate this, as well as give you more control over which packages
are acted on by debhelper programs, all debhelper programs accept the
-a, -i, -p, and -s parameters. These parameters are cumulative.
If none are given, debhelper programs default to acting on all packages listed
in the control file, with the exceptions below.
First, any package whose Architecture field in debian/control does not
match the build architecture will be excluded
(``Debian Policy, section 5.6.8'').
Also, some additional packages may be excluded based on the contents of the
DEB_BUILD_PROFILES environment variable and Build-Profiles fields in
binary package stanzas in debian/control, according to the draft policy at
<https://wiki.debian.org/BuildProfileSpec>.
Automatic generation of Debian install scripts
Some debhelper commands will automatically generate parts of Debian
maintainer scripts. If you want these automatically generated things
included in your existing Debian maintainer scripts, then you need to add
#DEBHELPER# to your scripts, in the place the code should be added.
#DEBHELPER# will be replaced by any auto-generated code when you run
dh_installdeb.
If a script does not exist at all and debhelper needs to add something to
it, then debhelper will create the complete script.
All debhelper commands that automatically generate code in this way let it
be disabled by the -n parameter (see above).
Note that the inserted code will be shell code, so you cannot directly use
it in a Perl script. If you would like to embed it into a Perl script, here
is one way to do that (note that I made sure that $1, $2, etc are set with
the set command):
my $temp="set -e\nset -- @ARGV\n" . << 'EOF';
#DEBHELPER#
EOF
system ($temp) / 256 == 0
or die "Problem with debhelper scripts: $!";
Automatic generation of miscellaneous dependencies.
Some debhelper commands may make the generated package need to depend on
some other packages. For example, if you use
dh_installdebconf(1), your
package will generally need to depend on debconf. Or if you use
dh_installxfonts(1), your package will generally need to depend on a
particular version of xutils. Keeping track of these miscellaneous
dependencies can be annoying since they are dependent on how debhelper does
things, so debhelper offers a way to automate it.
All commands of this type, besides documenting what dependencies may be
needed on their man pages, will automatically generate a substvar called
${misc:Depends}. If you put that token into your debian/control file, it
will be expanded to the dependencies debhelper figures you need.
This is entirely independent of the standard ${shlibs:Depends} generated by
dh_makeshlibs(1), and the ${perl:Depends} generated by dh_perl(1).
You can choose not to use any of these, if debhelper's guesses don't match
reality.
Package build directories
By default, all debhelper programs assume that the temporary directory used
for assembling the tree of files in a package is debian/
package.
Sometimes, you might want to use some other temporary directory. This is
supported by the -P flag. For example, "dh_installdocs -Pdebian/tmp", will
use debian/tmp as the temporary directory. Note that if you use -P, the
debhelper programs can only be acting on a single package at a time. So if
you have a package that builds many binary packages, you will need to also
use the -p flag to specify which binary package the debhelper program will
act on.
udebs
Debhelper includes support for udebs. To create a udeb with debhelper,
add "
Package-Type: udeb" to the package's stanza in
debian/control.
Debhelper will try to create udebs that comply with debian-installer
policy, by making the generated package files end in
.udeb, not
installing any documentation into a udeb, skipping over
preinst,
postrm,
prerm, and
config scripts, etc.
ENVIRONMENT
- DH_VERBOSE
-
Set to 1 to enable verbose mode. Debhelper will output every command it
runs. Also enables verbose build logs for some build systems like autoconf.
- DH_COMPAT
-
Temporarily specifies what compatibility level debhelper should run at,
overriding any value in debian/compat.
- DH_NO_ACT
-
Set to 1 to enable no-act mode.
- DH_OPTIONS
-
Anything in this variable will be prepended to the command line arguments
of all debhelper commands.
When using dh(1), it can be passed options that will be passed on to each
debhelper command, which is generally better than using DH_OPTIONS.
- DH_ALWAYS_EXCLUDE
-
If set, this adds the value the variable is set to to the -X options of all
commands that support the -X option. Moreover, dh_builddeb will rm -rf
anything that matches the value in your package build tree.
This can be useful if you are doing a build from a CVS source tree, in
which case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories
from sneaking into the package you build. Or, if a package has a source
tarball that (unwisely) includes CVS directories, you might want to export
DH_ALWAYS_EXCLUDE=CVS in debian/rules, to make it take effect wherever
your package is built.
Multiple things to exclude can be separated with colons, as in
DH_ALWAYS_EXCLUDE=CVS:.svn
SEE ALSO
- /usr/share/doc/debhelper/examples/
-
A set of example debian/rules files that use debhelper.
- <http://joeyh.name/code/debhelper/>
-
Debhelper web site.
AUTHOR
Joey Hess <
joeyh@debian.org>
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- DEBHELPER COMMANDS
-
- Deprecated Commands
-
- Other Commands
-
- DEBHELPER CONFIG FILES
-
- SHARED DEBHELPER OPTIONS
-
- COMMON DEBHELPER OPTIONS
-
- BUILD SYSTEM OPTIONS
-
- COMPATIBILITY LEVELS
-
- NOTES
-
- Multiple binary package support
-
- Automatic generation of Debian install scripts
-
- Automatic generation of miscellaneous dependencies.
-
- Package build directories
-
- udebs
-
- ENVIRONMENT
-
- SEE ALSO
-
- AUTHOR
-